Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: edu_ns on August 16, 2011, 07:58:57 AM
-
Hi:
My machine is X horiz right, Y vert right, Z vert left and A horiz left. I don´t have B, C, etc. Usually I cut wings in 3D with Profili soft, which generates GCodes I cut via Mach3.
Sometimes I need to cut 2D profils designed in Acad in dxf. Lazy Cam only generates GCode with X and Y axes (with default pre processors) so in Mach3 I define A axis (horiz left) as salve of X (horiz right) but I can´t define Z (vert left) as slave of Y (vert right) because Z is main axe. I think I´m right.
Is it possible with Lazycam, generating a GCode with XYZA axis? X and A would be identical, and the same with Y and Z. ¿Perhaps with a foam 2D specific post processor?.
Thanks.
Edu
-
Edu,
Lazycam is the way it is and is no longer being developed so your on your owne.
Don't have the foggiest idea on how to change LC's post processor.
RICH
-
Might want to reconsider your axis assignments it would make it easier to deal with. X/a Y/b
(;-) tp
-
Might want to reconsider your axis assignments it would make it easier to deal with. X/a Y/b
(;-) tp
My board has only X,Y,Z,A :(
-
It does not matter what the board thinks they are. You make the axis assignments and slaving in MAch3 config pins/ports and slave axis settings
(;-) TP
-
Thank you very much. I've got it as you said, BR549 :)
-
ive got the exact same problem but dont have a clue how to change the pins ports, or rather what to change them too ?
-
In pin assignments screen, Z line in blank, and what was there, write it in B line. Now you´ll have B axis and it will be able to slave to Y axis
-
thank you, going to have a crack at it now
-
it works, thanks :D