Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: inivator on August 03, 2011, 07:19:33 AM

Title: Input Signals
Post by: inivator on August 03, 2011, 07:19:33 AM
I have a four (4) axis Probotix SidebySide system, with A axis slaved to Y.  All limit switches are wired by axis, not together.  What should the input  port and pins be set at.
A printout of the input page would be really nice, but anything will help.

Inivator