Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dfurlano on December 10, 2006, 02:46:25 PM

Title: Shuttle question
Post by: dfurlano on December 10, 2006, 02:46:25 PM

Is there a way to change the jog increment from .1 to .01 to .001?

Couldn't find the key.

Thanks.

Dan.

Title: Re: Shuttle question
Post by: ynneb on December 10, 2006, 04:40:01 PM

Press the TAB key on your keyboard. The jog control should appear. From memory there is a increment setting in there.

Title: Re: Shuttle question
Post by: dfurlano on December 10, 2006, 09:59:46 PM

What I am wondering is if you can change the jog step on the shuttle.

Title: Re: Shuttle question
Post by: Brian Barker on December 11, 2006, 08:41:30 AM

Change the jog inc on the Tab screen and that will change the inc move for the shuttle

Title: Re: Shuttle question
Post by: dfurlano on December 11, 2006, 06:51:43 PM

Thanks for the replys.

The only increment my shuttle will change by is .1 in a positive or negative direction.  I tried changing the jog amount in the MPG window to .001 but when I go back to the shuttle it increments by .1 for every button push.

Am I doing something wrong?

Thanks for all the support.

Dan.

Title: Re: Shuttle question
Post by: dfurlano on December 11, 2006, 08:49:34 PM

Still does not work even after I fixed the other issues.

Title: Re: Shuttle question
Post by: faby on December 12, 2006, 05:44:13 AM

If I understand what you mean, there's a way to assign it in  the plugin configuration screen.

Faby