Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: jeep534 on January 27, 2006, 10:01:59 PM

Title: mach 2-3-4 differences
Post by: jeep534 on January 27, 2006, 10:01:59 PM

What are the basic differences between the different relases of mach-2, mach-3 and mach-4
fumbling novice..
thanks archie =) =) =) 

Title: Re: mach 2-3-4 differences
Post by: Art on January 27, 2006, 10:07:45 PM

Hi Archie:

 MachIV is special, it is under development as a hardware pulseing engine. It is to be ignored by all but testers until such time as its fully released.

Mach2, and 3, ad simply the early, and the recent. Mach3 is an ongoing project of adding features, and adding capabilities. Read all the MAch3 docs for specifics, but most of us are now usng Mach3, as its much more powerfull.

Regards,
Art

Title: Re: mach 2-3-4 differences
Post by: jeep534 on January 28, 2006, 07:48:08 AM

Thank you,,
I have purchased mach 2 about 6 months ago but i have not gotten to the testing stage with my equipment. I have been mostly on the road working and haven't had the time to tear into this project.  so it is drop mach-2  and upload mach-3
archie =) =) =)