Machsupport Forum
Third party software and hardware support forums. => LazyTurn => Topic started by: ThomP on July 14, 2011, 09:58:24 AM
-
When using the debug tool, it would be nice if the tool X and Z coordinates were indicated after a debug location has been selected.
In use, as I click along the path, a box would show up adjacent to the tool, indicating the X and Z of the tip. This feature would aid in knowing that the correct tool path was selected for examination.
-
The tip center is wherever you place your crosshair, and if you don't move the mouse , you will see Z &X location in the lower left hand corner of the screen.
Note that debug applies to what ever tool is currently selected. It dosn't automaticaly select the tool associated with a selected Toolpath. In fact it dosen't even need a toolpath.
Art ended the development work on LT but nothing wrong with posting desires ....never know.
RICH