Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Mirvays on July 05, 2011, 05:21:11 AM
-
Hello guys i have couple of question before i buy Mach3 ... i wanna build 5 Axis CNC Machine XYZ AB ... is it possible configure mach 3 to 5 axis machine ... i saw MotorOutputs tab there is 6 axis setting available... but in Mach interfase i see only 4 axis indicator ... so i'am little bit confused ...
sorry for my English ...
-
... I saw MotorOutputs tab there is 6 axis setting available... but in Mach interface I see only 4 axis indicator...
Mach will control up to six axes.
What you see on the screen is purely a function of what the screen designer wants you to see. Each button, DRO, LED can be displayed or not as necessary.
If you want a six-axis screenset, you have to design/write one.
Have a look at the customisation manual for a list of items that are possible (UserButton, OEMDRO, OEMLED).
-
There's a 6 axis screen here.
http://www.machsupport.com/screens.php