Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: shaffin on June 30, 2011, 09:15:11 PM
-
Hello,
I just got my JCUT-6090B with linear rails but it has ballscrew (on all 3 axis) instead of racks. I also got the 2.2Kw spindle and coolant pump on it. I choose to go with the Mach3 controller.
The problem I am facing is that when I connect the controller to power, I can hear a hissing sound (assuming that the motors are engaged), but when I connect the LPT cable and start Mach3, the machine does not jog.
I am thinking that this is a Mach3 setup, can someone who has a similar machine please share a Mach3 configuration file to help me with the setup please. Any troubleshooting problems will help as well.
Thanks,
Sam.
-
Attach your xml file to a reply. You will find it in the directory where you installed Mach.
Someone will be with you shortly to assist....... :)
RICH