Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: kak on June 17, 2011, 03:37:28 PM
-
It started today. After touching my touchoff plate, Z axis DRO always shows +269 in stead of 0. I mean in stead of 6.5 I set it to move up 6.5 after touching the plate. Auto zero is checked in config/home and limits.
I was playing with the button "set variable position" and "go to variable position" yesterday to see how it works.
Maybe this is the reason, but how can I fix that?
-
Do you have a Home Off value set?
Hood
-
No, I don`t. Its 0
-
If you attach your xml I will see if I can find the problem.
Hood
-
Its not easy to attach files. Ill try to zip it.
-
I`ve found it:-)
The Gage Block High was set to +269.
This "set variable position" button is changing my touchoff plates thickness. I have try a few times. A bug?
-
Where is the Ser variable position?
Hood
-
Its on the MDI ( Alt+2) screen
-
Seems to be working fine here, might be an idea to try a standard screenset to see if thats the issue.
Hood
-
Thank you.
Right. Its not a standard screeenset. But the only one I could find with working edge and center finding macros.
Is there another options available?
-
Daves screenset http://www.calypsoventures.com/home.html is supposedly excellent for that but its not free.
Hood