Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: dinko on June 11, 2011, 12:51:05 PM
-
Greetings !!
I have poblems with Connections/Setup on mach 3 with spindle:
i have 4 ports on LPT conroler that i can on/off my electric things.
RELAY1= P1
RELAY2= P16
Pump= P17
Spindle =P14
Spindle speed =P14* i thing i need to regulte extra electronics...
so i need help to setup my MACH3 to on/off my spindle and where to connect
THANKS!!
p.s. : sorry about my english
-
How are you controlling your spindle speed? What kind of spindle/drive is it?
Hood
-
I have controled speed witout electronics... i need just off/on.. so i need only when start maching to turn on spindel and when its done spindel off. no need to regulate speed
TNX
-
Ok so you only need one output to turn On/Off the spindle via a relay.
Hood
-
i setup on:
Config>Ports and pins
Output signals:
on output#1 :Chacked | 1 | 14 | active
but doesent work nothing
or if i must work on something other setup ??
-
Config, Ports and Pins, Spindle Setup and uncheck "Disable Spindle Relays" and enter 1 for M3. see pic.
Hood
-
i have this seting like you show and i change settings like i saw on video on mach3
output#1 : cahcek | 1 | 1 | active and still dont work...
-
Can you attach your xml please and I will see if I can find a problem.
Hood
-
I hope it will work
tnx
-
Sent you a PM
Hood
-
I make to do right... i dont have some power on 12V for some part of electronic... and now work
Thanx