Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: sml on June 04, 2011, 11:09:03 PM
-
Hi to all
I need a general(Fanuc,Mach3,...) 5 axis post processor for Powermill software by PMPOTS processor.
Please help me and sent a 5 axis post processor to below Email address :
mctco.uae@gmail.com
Thank you
-
Hi.
I can do it. if you want please feel free to contact me E.kashfi@gmail.com