Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Vmax on January 27, 2006, 12:24:54 AM

Title: Index/timing signal
Post by: Vmax on January 27, 2006, 12:24:54 AM

Art what is the difference between the index signal function and the timing signal function in Mach3?  Terry

Title: Re: Index/timing signal
Post by: Art on January 27, 2006, 07:53:20 AM

Hi Terry:

  The index, expects one pulse per rev. The Timing, expects multiple pulses per rev with one larger than th eothers by 50% as a 0 degree point..

Regards,
Art