Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: sml on May 19, 2011, 07:12:56 PM
-
Hi to all
I want use Mach3 for control a cnc machine with below specification :
Spindle : DC motor - permanent magnet - 400 watt at 3600 rpm - 90 volt - 4 amper.
Axis motor : stepper motor - 5 phase - 10 wire - 16 kgf.cm - 1.4 amper.
What board do you suggest for control this spindle and axis motor? I don't know how can i control the spindle motor?
Can some one help me.
Does any board can control this spindle directly?
Please help me
Thank you
-
Hi,
THe spindle motor is best controlled by a DC motor controller such as the KBIC-120 by KB electronics
http://www.kb-electronics-controls.com/_product_15408/9429_-_KBIC-120
http://www.plccenter.com/Buy/KB%20ELECTRONICS/KBIC120
or one like this that is very popular;
http://www.surpluscenter.com/item.asp?item=11-2269&catname=electric
With one of these controllers, you can then use a PWM to control voltage converter such as the DC-03V3 DigiSpeed (That I sell) to control the spindle speed from Mach3.
http://www.homanndesigns.com/store/index.php?main_page=product_info&cPath=1&products_id=21
Cheers,
Peter.