Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: KG on November 28, 2006, 03:18:19 AM

Title: Quadrature Encoders
Post by: KG on November 28, 2006, 03:18:19 AM

Hi All,

Can anyone recommend a source for Quadrature Encoders for use with a NEMA 23 Steppers ?  Looking high and low with no luck thus far.

Thanks,

Kenneth

Title: Re: Quadrature Encoders
Post by: Chaoticone on November 28, 2006, 09:03:20 AM

Try this one out.

http://web2.automationdirect.com/adc/Search/Search?searchquery=encoder&cmd=Search&fctype=adc.falcon.search.SearchFormCtrl&TxnNumber=-1

I hope this helps. ;D