Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: machineman on May 02, 2011, 02:50:29 AM

Title: Mach3 not performing M03 function
Post by: machineman on May 02, 2011, 02:50:29 AM

Running a Plasma using M03 to O/P1 to control Hypertherm45 to initiate arc, can manually strike arc by toggling spindle on/off control or F5 but on running Gcode and even single stepping code, at M03 op nothing happens machine will perform as if it was cutting  any suggestions welcome

Title: Re: Mach3 not performing M03 function
Post by: BR549 on May 02, 2011, 10:38:31 AM

Double check your M3 macro to make SURE the start code is there  DoSpinCW()

Just a thought, (;-) TP