Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: handsmfg on May 01, 2011, 02:32:42 PM
-
Posted this on the Mach Yahoo site.
I was using Mach 3.43.22 with David Bagby's MSM enhancement for Mach 3 and
having no trouble doing ATC tool changes. I upgraded to Mach 3.43.35 because of
the Estop script bug in Mach 3.43.22. Now I can't do any ATC tool changes. All I
get is a message in the status bar saying Tool Change Complete. I made sure that
ATC tool change was enabled on the Config screen. Still no ATC tool change. I
went back to Mach 3.43.22. ATC tool changes work again. Sorry for posting bug
here but didn't know where to do it on the Mach form or web site.
Eric
-
Hi all,
FYI - This issue turned out to be a combination of things.
1) The results of Mach's GetCurrentTool() call changed with Mach 3.43.35
(compared to mach 3.43.22 lock down).
There was a bug in 3.43.22 where the results of the call lagged 1 tool change
behind the contents of OEMDRO 824. With 3.43.35 they now match.
2) The change in the result from the mach call exposed a bug in MSM that in turn
impacted ATC script handling. I've fixed MSM to match the mach change and ATC
use under MSM is now working again with mach revisions >= 3.43.35. MSM users
with ATCs will want to update to MSM v1.1.3 to get the fix.
Dave