Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: wlbjab on April 26, 2011, 03:43:48 PM
-
My Z & Y axis home switches suddenly stopped working ( they are wired in series ). They used to home with Z first and it would move off switch and Y would home and move off switch. Now - Z mvoes first and hits switch and does not move off. Y will not home. Then the X axis will home and move off switch ( X axis is wired seperatley.
Any idea's?
Thanks
Will
-
I'm guessing you may be picking up a little noise now. Have you tried to add any debonce and see if that helps? Moved any wires around or anythng to induce noise?
Brett
-
Brett
You are ABSOLUTELY CORRECT!
Wow, thank you very much. I spent 3 hours fighting the problem before I desperately posted for help.
Thanks again
Will
-
No problem Will, glad you got it.
Brett