Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ostie01 on April 06, 2011, 03:37:14 AM

Title: Pulse frequency variation
Post by: ostie01 on April 06, 2011, 03:37:14 AM

Look at pictures and tell me what you think. Look at the pulse frequency DRO.

Every 1 or 2 seconds, the frequency oscillate between these values, very strange but since some time, I get used to strange things with Mach3

It goes from one value to the next in a regular sequence , like I said, every one or so second.

No other software are running.

Jeff

 

Title: Re: Pulse frequency variation
Post by: Tweakie.CNC on April 06, 2011, 04:16:45 AM

Jeff,

It's my guess that something else is running in the background and you just haven't found it yet.

Tweakie.