Machsupport Forum

Mach Discussion => Mach SDK plugin questions and answers. => Topic started by: dresda on March 28, 2011, 11:59:26 PM

Title: Don't have much hair, but I'm still pulling it out..
Post by: dresda on March 28, 2011, 11:59:26 PM
Just bought 2 ShuttleRU_LCD pendants from Andrey in Russia, he said the plugin is based on the Shuttle pro except for the LCD.
On Mach3 on my desktop all the functions work. I set up the buttons and the inner ring goes through the step functions good and the outer ring starts of at a slow jog and increases to a fast jog.
When I install on my machine (not using steppers but DSPMC) everything works except the jog outer ring, when I remove DSPMC and just run Mach 3 on the computer the Shuttle works fine, any help would be appreciated.
P.S. I have emailed Rufi at Vital Systems.