Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: sign solutions on March 20, 2011, 08:53:20 PM
-
project has Text text ok in LC but cuts mirror in mach3
help
also some times the project loads outside of the "table limits" set in homing
-
What you see in LC is what the code generates.
The gcode represents the piece size / project so it can be larger or outside your table limits.
Concerning mirror of the text......... check out this thread. It is not a LC problem but rather your machine setup.
http://www.machsupport.com/forum/index.php/topic,17276.msg117959.html#msg117959
BTW, see Tutorial #4 in the manual on text.
RICH
-
Mirroring. Does it Mirror in X or in Y? You need to alter the configuration for which ever axis is mirrored. In other words yoiu have positive and negative swapped for one axis.