Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: jguillen on November 22, 2006, 02:26:29 PM

Title: Screw Mapping
Post by: jguillen on November 22, 2006, 02:26:29 PM

Hello All,

Can someone please explain how the screw mapping function is used ???
Thanks,
Jose.

Title: Re: Screw Mapping
Post by: Brian Barker on November 24, 2006, 01:25:41 PM

you need to have your homing set up and softlimits working to use this...

As you can see it is the amount off that you are vs. the % of the distance down the screws length. you will need some tools to measure this...