Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Pupak on November 22, 2006, 01:24:18 PM

Title: Backlash ON problem Y axis
Post by: Pupak on November 22, 2006, 01:24:18 PM

If Backlash ON and Axis Y move to more cca 15mm,speed for Y is not OK -> crash (lost steps). Tested on Mach2 and Mach3 - 2.00.12 on different computer and machines.

Title: Re: Backlash ON problem Y axis
Post by: Brian Barker on November 24, 2006, 01:16:11 PM

What do you have the backlash % speed correction set to? try setting it down to about 10% and see if you still have the problem