Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: allaces on March 05, 2011, 01:26:09 AM

Title: how do I get Mach 3 to simply display controls for 5 axis?
Post by: allaces on March 05, 2011, 01:26:09 AM
Hello,

I have a 5 axis CNC... how do I get Mach 3 to simply display controls for 5 axis?

Thanks
Title: Re: how do I get Mach 3 to simply display controls for 5 axis?
Post by: Tweakie.CNC on March 05, 2011, 02:36:25 AM
Not much of an answer really but you could check the existing screen sets (downloads tap at top of screen) to see if any ready made's suit your needs.
The best option is to create your own screen. There are a few different screen designers to choose from, bit of a learning experience but not too difficult really (for me it would be a day's work  :-\  for an expert an hour or two). There is lots of available documentation on VB scripts and button / led / dro codes etc.

Tweakie.