Machsupport Forum

Mach Discussion => Mach Screens => Finished Screens => Topic started by: Denis on March 04, 2011, 09:33:53 AM

Title: Lathe screens in french
Post by: Denis on March 04, 2011, 09:33:53 AM

Hello,
I just finished my turn screens in french.
Thanks to Klaus Dietz for Machscreen (and to Artsoft for Mach3!).
Unzip and copy "Turnbitmapsfr"under C/Mach3/Turnbitmaps and "TourMach3fr.lset" under C/Mach3 folder.
Denis

Title: Re: Lathe screens in french
Post by: Maurice Proulx on April 04, 2011, 01:00:59 AM

Very well done.  I will give it a try

Maurice