Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Phase on March 01, 2011, 10:35:19 PM
-
Hi,
I'm using the same switch for homing and to limit travel. Homing is working, however, when the machine is moving and I trigger the switch nothing happens.
I thought I would get the equivalent of an eStop or the same we get with a softlimits violation, but right now it just keeps on going.
Is there a flag I forgot to set someplace?
Thanks!!!
-
Sounds like you have forgotten to enable the limits or you have the wrong port or pin assigned.
Hood
-
:lol:
Ah!
So that is what X++ and X-- means.
Thanks!!!