Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: GMezzacapo on February 19, 2011, 11:37:22 PM
-
Hi Everyone, I had received my Mach3 license from zentoolworks, but the lazycam only process 49 lines to mach3, the license was saved in mach3 folder, and I can process more than 500 lines in mach3 but the lazycam not. Sorry if the topic was solved before, I can't find it in the forum. Thanks for the help.
Gianni
-
Gianni,
There is a 50 line limit in LC if you do not have a Mach license and also to use additional features in LC you will need a Pro license for LC.
What did you try to do in LC?
RICH
-
Hi Rich, I have a Mach3 license, I am only doing a letter from a dwg file, when I try to export to mach3 it only give me 49 lines.
-
Post your xml file.
RICH
-
I'm pretty sure that LazyCam is not seeing the Mach license file. I think that Zen Toolworks distributes their licenses with the serials still attached at the end (ie. "Mach1Lic.dat.******************"), which Mach can now recognize, but LazyCam does not...
scott
-
Scott,
Any fix to that problem?
RICH
-
I'm pretty sure that LazyCam is not seeing the Mach license file. I think that Zen Toolworks distributes their licenses with the serials still attached at the end (ie. "Mach1Lic.dat.******************"), which Mach can now recognize, but LazyCam does not...
scott
Could you just place the normal "Mach1Lic.dat" in there along with the other one ?
Zen would see what it needs and LCam would see what it needs.
Just a thought,
Russ
-
Thanks, it was the problem the license come with serial in the file name, removing it and the problem was solved. Thank you very much
Gianni
-
SO you removed the serial part out of the file name?
RICH
-
Yes Rich Thanks, that was the solution. Regards
Gianni