Machsupport Forum

Third party software and hardware support forums. => LazyTurn => Topic started by: hprice on January 23, 2011, 06:46:05 PM

Title: Can't find DXF files.
Post by: hprice on January 23, 2011, 06:46:05 PM

Apologies to all in advance if this is a dumb question.  I have downloaded the software, and LT is functioning fine.  But I have been unable to figure out how to get to the DXF files listed in Appendix D of the manual, to download and play with some of them.  I see the reply numbers but cannot seem to find the original threads.  Any help will be  appreciated,  (with appropriate humility) :-[.

Harvey

Title: Re: Can't find DXF files.
Post by: RICH on January 23, 2011, 07:21:42 PM

Harvey,
Go to the LT thread and in that thread find the reply number.
Sorry, but i don't know which page the reply is on.

RICH

Title: Re: Can't find DXF files.
Post by: hprice on January 23, 2011, 09:05:30 PM

Rich,
Thanks for the quick answer.  I thought I was just overlooking something.  I will go back and go through them. 
Harvey