Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Martynb on January 22, 2011, 01:34:19 PM

Title: Help
Post by: Martynb on January 22, 2011, 01:34:19 PM

Hope somebody can help
Ineed a syil x2 xml metric redy to go can some body help befor i pull my hair out

Title: Re: Help
Post by: Hood on January 22, 2011, 02:16:14 PM

Do you have the imperial xml? If so then easy enough to make up a metric one, if you attach the imperial one I can quickly change it for you.
Hood

Title: Re: Help
Post by: Martynb on January 22, 2011, 02:21:46 PM

I downloaded the one from syil america but could not get it to work

Title: Re: Help
Post by: Hood on January 22, 2011, 02:24:28 PM

Do you have a link to it?
What did not work about it?

Hood

Title: Re: Help
Post by: Martynb on January 22, 2011, 02:32:50 PM

I will change from my ipad to computer and down load a copy to you
Homing and limits the norm i supose any help

Title: Re: Help
Post by: Martynb on January 22, 2011, 03:00:47 PM

trying to send the file

Title: Re: Help
Post by: Hood on January 22, 2011, 03:28:38 PM

Ok try this, I have not changed anything other than converting imperial to metric however some of  the pin numbers seem a bit strange, they could be correct but are certainly unusual.
Hood

Title: Re: Help
Post by: Martynb on January 22, 2011, 03:36:27 PM

thanks hood i will try it in the morning pin setings i will change tomorrow thanks i will be in touch

Title: Re: Help
Post by: Martynb on February 06, 2011, 11:49:30 AM

Hi hood tryed it to day changed the pins now how do you set up the rest of it

Title: Re: Help
Post by: Hood on February 06, 2011, 01:40:48 PM

Whats working and whats not?
Hood

Title: Re: Help
Post by: Martynb on February 06, 2011, 01:54:55 PM

Homing to start with

Title: Re: Help
Post by: Hood on February 06, 2011, 01:58:42 PM

You could try the automated setup for the inputs, I have never used it myself but looks like it should be easy enough to follow. Config menu then Ports and Pins then Inputs and you will see the button on the lower right of the page.
Hood