Machsupport Forum
Mach Discussion => Mach Screens => Finished Screens => Topic started by: voodoo vintage on January 06, 2011, 07:33:31 PM
-
This is a simple one-page screen set customized for those using the MP3000 UBOB from CandCNC Bladerunner system. Screen Resolution is 1438 x 825.
The menu utilizes controls for the MP3000 with DTHC and a pneumatic scribe pen. Two macro buttons on the tool-path window are left for custom commands.
Created by:
Voodoo Vintage Fabrication
Austin, Texas
http://www.voodoovintage.com
INSTRUCTIONS:
Copy the "voodoo" folder to your Mach3/Bitmaps directory. Be sure to leave the PNG file in the "voodoo" folder.
Copy the voodoo.set file to your Mach3 root directory.
Enjoy!
-
very nice