Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: gguidi on November 13, 2006, 02:09:37 PM
-
I am running Mach III 2.0.009 with LazyCam I have two problems.
It dose not cut all of the lines in the file. It looks like it dose not add the M Code to turn on the laser just in two spots. The other problem is that it will not add the Coolant on M code I am running in laser mode. Any ideas?
Thanks
Gary
-
Hi, Gary
Post your DXF file will take a look at it.
Thank's, Chip