Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: LB on December 08, 2010, 11:00:32 AM

Title: Can Mach 3 read these programs??
Post by: LB on December 08, 2010, 11:00:32 AM

Hi,
Can Mach 3 read any of these programs?  AUTO CAD DWG, AUTO CAD DXF, EMF, FMV, GEM, PAT, PCT, PLT, SVG, WMF, WPG.

Can I use Corel Draw with Mach 3??

Thanks,

Title: Re: Can Mach 3 read these programs??
Post by: BR549 on December 08, 2010, 11:33:12 AM

These are CAD drawing formats Mach does NOT read them directly. They would need to be converted to a GCODE format.  You cna use Corell with mach BUT the final ouput for Mach to be able to use it MUST be a gcode format.

Hope that helps, (;-) TP

Title: Re: Can Mach 3 read these programs??
Post by: LB on December 08, 2010, 11:39:59 AM

Quote from: BR549 on December 08, 2010, 11:33:12 AM

These are CAD drawing formats Mach does NOT read them directly. They would need to be converted to a GCODE format.  You cna use Corell with mach BUT the final ouput for Mach to be able to use it MUST be a gcode format.

Hope that helps, (;-) TP

Thanks for the help.  We are now using Bob Cadv21, and would rather use Corel Draw.  For us, it is much easier to use. 

LB