Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Dragon616 on December 05, 2010, 04:18:07 PM
-
Hello
I am using Mach3Turn for a lathe attachment that I built.
I would like to know if Mach3 can do this:
Call a tool with T command
Move the tool to a start position that I set with the tool offsets
Start machining from that point
Return to machine home position or go to another tool
Thanks for any help
-
Have a look at Appendix F anf G in the LazyTurn Manual which can be found in Members Docs.
It talks and walks you thru the steps to do what you want.
RICH