Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: professorburnout on November 27, 2010, 10:11:01 AM
-
I have a Cincinnati Arrow 500 and the control computer is not working any more. The servo controllers in the machine have an input for an analog control of +10v to -10 volts. What methods are available for Mach3 to to control a system like this.
Thanks,
Paul
-
DSPMC/IP is a great option especially if you need lots of I/O. I have 2.
Kflop w/Kanalog.
Galil. I have the ISA board and a USB 2030. Neither is running as of yet
Mesa(under devlopment) I am doing some testing for Smurph.
YAPS10v is a step and direction to analog converter.
It all depends on what you need and what you want to spend.
Mike