Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ppickard on November 21, 2010, 05:19:40 PM
-
Hi,
I'm still setting things up and am a newbie as well...I'm trying to gt everything set, home, soft limits, etc...
Where do I set up my table size so I can see it in the display mode?
Thanks,
Paul
-
That is controlled by your soft limits settings. You may have to press the Display button to toggle it to table view and possibly have to Regen the toolpath.
Hood
-
OK, thanks, but is the travel vs actual table size a different setting? If so which is which? Sorry to be so ignorant...
-
Travel is the same as table size in the respect that it is the area you have for cutting. For example a knee mill may have a longer length than the X axis can travel and table is narrower than the Y axis travel but the actual distance each axis travels determines the cutting area.
So really instead of saying Table view it may be better to say work area.
Hood