Machsupport Forum
General CNC Chat => Share Your GCode => Topic started by: tgeist on November 08, 2010, 10:03:53 AM
-
I', looking for the post to run my Master Cam MR2 (10.2.2.31) also says Ver. 0.17.1.167. I would like to do my drawning in my autocad and run through my Master Cam which I use in my shop. Any help would be good.
-
May I express my master no information offline.
Don't understand the reply....sort of like a cypher. ???
RICH
-
What version of Mastercam? X - X5, lathe or mill post? MR2 doesn't tell me much. Thats just the maintenance release. I have been working on a lathe post for X5
-
i used mastercam 14 and i need to know what post to use because tha mpfan make tha machine loca loca
-
because tha mpfan
Don't understand.. ???
RICH
-
Mpfan is a generic post for Mastercam. If you purchased Mastercam you should have no problem getting a post from your dealer.
-
ok but my Q WAS which post I need to ask for
-
Well just guessing here BUT if you are using MACH3 I would ASK for a post for MACH3.
Just a thought, (;-) TP
-
I think a regular FANUC post would work.(already in mastercam)
Will probably have to make some changes in the header file but the code will work.
Jeff