Machsupport Forum
General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: Bob La Londe on November 07, 2010, 09:49:39 PM
-
(http://img178.imageshack.us/img178/3362/dscf1749a.th.jpg) (http://img178.imageshack.us/i/dscf1749a.jpg/)
I got the screws and anti backlash nuts mounted on my new (to me) even smaller machine The end of last week. The mounting blocks were cut on my Mach 3 driven Taig. They are to adapt an old style MaxNC 5 to acme screws and anti backlash nuts.
The machine was assembled and hand tested Friday. I would have done a full test except I don't have an LPT port on the PC I planned to use to drive it. Oops. I got one ordered and I'll see how it works.
I tied it to my other computer today, and after making a recalculation to accomodate the screw pitch it seemed to work fine on a dry run of a helical cut. After playing with it and testing some things I mounted a temporary spindle on it and made a test cut. It worked fine. Now to start designing its permanet spindle. I plan to set it up with a redesign of my dual spindle mount, but I am playing with a couple ideas on how to zero the 2nd spindle to the 1st. When I get it figured out and built I'll post a video of it cutting two pieces at once.