Machsupport Forum
Mach Discussion => VB and the development of wizards => Topic started by: whitebear on November 04, 2010, 01:12:51 PM
-
i need a wizard that will move on a single axixs up and down going a certian length make a mark with a razor blade attach to the bit then move the length and make the mark agian i am wondering if the is already a wizard or if one could be made
-
I don't know of a wizard. Seems like you are just wanting to dupliate the movement of the Z axis moving up and down and the X or Y moving a certain distance. You can hand code that or draw what you want and have a program generate the required code.
RICH
-
If you can come up with a Simple drawing of what you need it to do and how far each phase has to move I am sure we can come up with something to help out.
DO you have to change the movement values from time to time or does it always stay the same?
(;-) TP