Machsupport Forum

Support => Forum suggestions and report forum problems. => Topic started by: dragonfinder1 on October 30, 2010, 10:47:00 AM

Title: down loads for the Art Soft site
Post by: dragonfinder1 on October 30, 2010, 10:47:00 AM

I've been trying to download the Mach .pdf's and even the latest version of Mach3 and can't from the Art Soft site. After trying for several hours the d/l is terminated and I have to start over. Is there another site to get documentation and plug ins from?

Thanks

Dave

Title: Re: down loads for the Art Soft site
Post by: ger21 on October 30, 2010, 07:29:26 PM

I just downloaded the manual in about 10 seconds. Probably on your end.

Title: Re: down loads for the Art Soft site
Post by: dragonfinder1 on October 30, 2010, 08:49:48 PM

I just downloaded several other files from Art Soft and they came through very fast, I also just watched a tv program on Hulu no problem, but when I tried to download the latest mach3-- 6.7 KB per second. Must be the route it's taking.

Title: Re: down loads for the Art Soft site
Post by: DaOne on October 30, 2010, 08:50:59 PM

You can also use a ftp client at ftp.machsupport.com

Title: Re: down loads for the Art Soft site
Post by: dragonfinder1 on October 30, 2010, 09:32:48 PM

Thanks 

I have the files I need. I went to the college and used the T-1 line.

Dave