Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: sim on October 19, 2010, 02:54:32 AM

Title: Build own router
Post by: sim on October 19, 2010, 02:54:32 AM
Hi Guys

I'm new to wood routers i use to build plasma . So i need some help . i want to know how mach3 initialize the tool to know where is the surface of the plate
i'll build a 3d router using Bobcad software for 3d post processing .

Thanks for the help
Simon
Title: Re: Build own router
Post by: Tweakie.CNC on October 20, 2010, 05:32:31 AM
Hi Simon,

Welcome to the forum.

There is some info under Members Docs on touch plates  http://www.machsupport.com/forum/index.php/topic,10088.0.html
And this is how I set tool height ( scroll down page to Tool Height Setting) http://www.cooperman.talktalk.net/files/17.htm

Hope this helps,

Tweakie.