Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: golash on October 17, 2010, 06:36:14 PM
-
Hi
I`m trying to get a feel for what I could expect from a diy cnc regarding accuracy.
-
Hmm.....loaded question........
All depends on the components of the machine and how you use it.
RICH
-
Hi
Something like a hole location to another hole. How close to the print are the holes.
-
Only as accurate as your machine, tooling, setup, and applied experience.
Mach controller is more accurate than anything you will build.
Your machine may move the drill within , say .0001" center to center of the holes, but that dosen't mean you
will hold that tolerance in actual practice.
RICH