Machsupport Forum

Mach Discussion => FAQs => Topic started by: Manley86 on October 01, 2010, 11:08:18 AM

Title: Help with Turn R2.0.053 Spindle Pulley Ratio location
Post by: Manley86 on October 01, 2010, 11:08:18 AM

Hey all, just a quickie.  I currently have Turn R2.0.053 and for the life of me cannot find the spindle pulley ratio box.  Any ideas where it could be would be great.  Its not on the spindle pulleys tab under config and yes my spindle is working on M3 and M4 commands but is out due to the ratio. 
Help would be great.

Rob.