Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Digilife on September 25, 2010, 08:00:52 PM

Title: BUTTON QUESTION
Post by: Digilife on September 25, 2010, 08:00:52 PM

HI GUYS, DOES ANYBODY KNOW HOW CAN I CREATE A BUTTON TO JOG AN AXIS INDEFINETLY.

THANKS IN ADVANCE. :)

Title: Re: BUTTON QUESTION
Post by: BR549 on September 25, 2010, 08:34:00 PM

SUre but NOT while doing anything else like running gcode(;-)

(;-) TP

Title: Re: BUTTON QUESTION
Post by: Digilife on September 25, 2010, 09:41:47 PM

ITS NOT TO RUN ANY CODE IS JUST TO CONVERT A PC ON A HIGH SPEED (45KHZ) STEP GENERATOR FOR A CUSTOM MACHINE WICH USES AN STEPPER MOTOR TO MAKE ITS WORK, ALSO IS IT POSSIBLE TO JOG ALL X,Y,Z,A,B,C AND HAVE INDEPENDENT FEED CONTROL ON EACH OR JUST A GENERAL FEED CONTROL FOR ALL OR THE ONES THAT YOU ACTIVATED TOGETHER FROM 1 TO 6?

Title: Re: BUTTON QUESTION
Post by: BR549 on September 26, 2010, 12:32:28 AM

ITS NOT TO RUN ANY CODE IS JUST TO CONVERT A PC ON A HIGH SPEED (45KHZ) STEP GENERATOR FOR A CUSTOM MACHINE WICH USES AN STEPPER MOTOR TO MAKE ITS WORK,

** OK


ALSO IS IT POSSIBLE TO JOG ALL X,Y,Z,A,B,C AND HAVE INDEPENDENT FEED CONTROL ON EACH

** NO


 OR JUST A GENERAL FEED CONTROL FOR ALL OR THE ONES THAT YOU ACTIVATED TOGETHER FROM 1 TO 6?

** SORTA