Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: StanLewis on September 23, 2010, 08:25:49 AM
-
Please forgive me if this has been answered before.... but...
Currently my CAM (VisualMill) generates the prologue gcodes all on one line. I had heard/remember that Mach didn't deal with this kind of coding at some point in the past.
Does the newer versions handle this? I could test this except my CAD/CAM machines are not at the same physical location as my Mach machine.
Stan