Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Ron Ginger on September 20, 2010, 08:42:04 PM
-
For the past few years we have been holding a CNC activity at Cabin Fever Expo. This year we have a seminar with a chance to win a CNC mill
The mill is the 3501 (aka KX1) sold by LittleMachineShop.com They are sponsoring this event, along with Brian Barker of the Mach3 software and Cabin Fever Expo.
We will hold a seminar on Friday, January 14 starting at 1:00. The seminar is called "From Packing Crate to Making Parts" We will open a new 3501 mill, install Mach3 on a PC, make all the configuration setting, test the mill for accuracy and backlash. Then we will setup and run a program to make a part. The seminar will be conducted by Ron Ginger and Brian Barker.
At the end of the seminar a drawing will be held and someone in the seminar will win the Mill and PC. The mill will be on display, making parts for the rest of the weekend show in the Mach3 booth.
The seminar will cost $50, which includes your admission to the entire weekend at Cabin Fever as well as the seminar. We are strictly limiting this to 70 people, so your chance to win over $4000 worth of equipment is good.
To sign up for the seminar see http://www.littlemachineshop.com/3975
For info on Cabin Fever see http://cabinfeverexpo.com/
ron ginger
-
Thanks for the heads-up Ron.
Will look for you guys there !
Who else can I be lookin' for ?
Graham ? ? ? You coming over ? RICH ? Budman ? Bret ? Brit ?
Regards,
Russ
-
....Hood, borrow one of them fishin' boats and come on over.
Would really like to see you there, as well as many other I'm sure!
Regards,
Russ
-
LOL They wouldnt let me in to the USA ;D
Hood
-
HA.....they now let anybody in !
But if you work hard and pay your taxes....they probably wont let you leave.
-
;D
-
hi guys
i am from Malta and i would like to meet some of you guys but it is a long way for me to come but if i will have some more info i would consider to come
is this only event that mach participate ?
i am really anxious to learn more about mach3
what wether will be at that time ?
what is the closest airport ?
hotel ?
-
I am sure you could twist my arm to make me attend the event, the last one was very good.
Graham
-
With Cabin fever fast approaching i searched the forums to see if anything was going on this year and found this thread.
following the link I see that the ticket for this event has been discontinued. Can i assume that it is sold out?
thanks,
Pete
-
Yep, sold out a couple weeks ago.
There will be a couple CNC seminars on Saturday, and Brian will be in the Mach booth both days.
-
Russ,
Hood,borrow one of them fishin' boats and come on over
The Mach Intelligence Team just sent this photo of Hood being hailed off by the towns folk when he left yesterday.
RICH :)
-
I am sure they would be celebrating like that if I were to leave :)
Hood
-
Ha ... certainly wish Hood could/would attend, really like to meet him.
I guess the only way would be for me to go over there. Then the pic would more resemble MY arrival ceremony ..... on my way direct to see the Wicker Man. :-\
:)
-
So who's going to the Cabin Fever besides me and Russ.
Rumor has it that Russ will be giving away $1 bills at the door. >:D
Can't miss him as he impersonates Hood sometimes but the give away is the hat with one horn. ;D
RICH
-
ha ha ha ha .........
I dunno RICH, all 70 seats are sold. Did you buy 69 of em' ? ha ha Guess you'll win the mill for sure then.
See ya there ! I'm going to watch you closely and try to stay one step ahead of ya lol.
I have a list for you to keep an eye peeled for, will do the same for you.
Good idea for anyone there who is looking for anything in particular. Pass out a little list so all can keep an active search going. Helps to find stuff that's easily overlooked.
See y'all,
Russ
-
I got to York today at 5:00. The KX1 mill is here, still in its crate and the crate looks fine- last year Little machine shop sent a demo and it arrived with a clear fork-lift size hole speared through the crate.
Lots of nice models in the auction, and a ton of great clock/watch tools.
I will be in the seminar room starting about 8:30 to setup and uncrate the machine. Brian and Andrew are doing teh all night drive thing, but plan to be in the seminar room by 9:00. Setup help, or just kibitzers are welcome.
The seminar will start at 1:00
It should be a fun weekend!
-
Great news Ron, glad you're in OK.
Hope to be there around 9. I'll help as I can.
See Ya,
Russ
-
Same here Ron.
I am wondering if you brought a boat and plan on going home with a bigger fire engine again?
RICH
-
Not me, Im going home lighter- I put several items in the consignment sale area.
But of course i will scan the vendor tables frequently for something I NEED
-
Congrats to both Brian and Ron for a great seminar :)
It was a please listening to both of you, even though I did not win anything >:(