Machsupport Forum
Mach Discussion => Mach Screens => CVI MachStdMill (MSM) => Topic started by: mick on September 13, 2010, 12:00:08 PM
-
Dave,
just noticed that the A axis dro's are being updated with Z axis co-ords on the path screen,
the gcode prog i was running only uses x,y,z .
MSM rel 10
mach3 ver 43.022.
By the way the A axis does'nt move only the dro's
rgds Mick.
-
Mick,
Thanks for spotting that. I've fixed it - fix will be in the next MSM release.
It was a bug in the 10x7 resolution set file. It's ok in the 12x9 resolution.
If anyone needs this fix quickly, let me know - otherwise I'll let it wait until there is enough to make a release.
Dave
-
Beta 11 is on the way to the server - it has the fix for this in it.
Dave