Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: chippypah on September 09, 2010, 04:21:55 PM
-
Hi All,
I am new to this so got a few questions, if somebody can help.
What feed rate and spindle spied should be used when cutting acrylic, I use 5mm and 10mm acrylic.
Cheers
Pete
-
Welcome, afraid I cant help as I really only cut metals but maybe you can find some info here, just did a quick google and this was the first one I saw.
http://www.plasticsmag.com/ta.asp?aid=2332
Hood