Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Don44883 on August 18, 2010, 03:42:04 PM

Title: feedrate
Post by: Don44883 on August 18, 2010, 03:42:04 PM

Is it posible to assign feedrate to the + and - keys so i can change feed on the fly.

new to this im using a 3 axis driver to control a telescope.

Title: Re: feedrate
Post by: Sam on August 18, 2010, 03:55:44 PM

there are feedrate overide hot-keys. It depends on what screenset your using as to what the keys are. I believe the default ones are the bracket keys "[ ]" or "0 9". Can't remember off the top of my head.