Machsupport Forum

Third party software and hardware support forums. => Promote and discuss your product => Topic started by: uirobot on August 11, 2010, 05:15:59 AM

Title: Integrated Stepper Motor with Drives compatiable with Mach3
Post by: uirobot on August 11, 2010, 05:15:59 AM
Hello everyone here, this is Tiger Huang product manager of stepper controller and stepper driver for integrated stepper motor (http://en.uirobot.com/robot) from UIROBOT. It was demonstrated on Mechmate3 using Mach3. tiger.huang@uirobot.com for more information.

(http://en.uirobot.com/upload/archive_pic/1/1274277859.jpg)
(http://en.uirobot.com/upload/archive_pic/1/1274277978.jpg)
Title: Re: Integrated Stepper Motor with Drives compatiable with Mach3
Post by: uirobot on September 15, 2010, 10:59:30 PM
integrated stepper motor with drives will save cables, even control box.
Textile machines and pharmaceutical machines with many many motors, integrated stepper motor could avoid complicated wiring.
Title: Re: Integrated Stepper Motor with Drives compatiable with Mach3
Post by: uirobot on October 13, 2010, 03:39:37 AM
S Curve ACCEL and DECCEL, SENSOR Input and Output
Title: Re: Integrated Stepper Motor with Drives compatiable with Mach3
Post by: dar303 on October 13, 2010, 05:35:10 AM
Hi,

Nice product!
This is mostly a hobbyist forum so if you publish data (supply voltage, current, pinout etc.) and if possible price + shipping cost to europe and USA you will get more customers!
Title: Re: Integrated Stepper Motor with Drives compatiable with Mach3
Post by: uirobot on October 13, 2010, 05:56:23 AM
Quote from: dar303 on October 13, 2010, 05:35:10 AM
Hi,

Nice product!
This is mostly a hobbyist forum so if you publish data (supply voltage, current, pinout etc.) and if possible price + shipping cost to europe and USA you will get more customers!

Thank for reply, please contact us by e-mail tiger@uirobot.com and you could also buy from our Euro and US dealers.
Title: Re: Integrated Stepper Motor with Drives compatiable with Mach3
Post by: uirobot on October 27, 2010, 04:41:09 AM
Hello everyone here, this is Tiger Huang product manager of stepper controller and stepper driver for integrated stepper motor (http://en.uirobot.com/robot) from UIROBOT. It was demonstrated on Mechmate3 using Mach3. tiger.huang@uirobot.com for more information.

(http://en.uirobot.com/upload/archive_pic/1/1287393924.jpg)
(http://en.uirobot.com/upload/archive_pic/1/1287393954.jpg)