Machsupport Forum

Third party software and hardware support forums. => Third party software and hardware support forums. => Topic started by: Henrik on August 07, 2010, 03:45:54 AM

Title: Bridgeport interackt 412 -1987 Spindle problem..
Post by: Henrik on August 07, 2010, 03:45:54 AM

Hey there..
I have this bridgeport and the backup batteries has run out of power,then i replaced them and reentered all the machine parameters,then i get it almoust running it cut get the x,y,z in reference.
But then ill try to get the spindle runnung so i go in manual mode and press the tool call button and entered spindle rpm at 200 and enter, but it just says that the spindle rpm is `invalid`??
What are im doing vrong...
The bp is from 1987 and has being standing whit no power on for about 2 years,i gat it for almoust nothing and now its standing in my new shop and it cut be fun to get it running again.
Regards
Henrik
Denmark.

Title: Re: Bridgeport interackt 412 -1987 Spindle problem..
Post by: Hood on August 08, 2010, 04:41:14 AM

Probably best to ask on the CNC Zones Bridgeport forum.
Hood