Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: hharley on August 03, 2010, 09:43:33 PM

Title: Zoom
Post by: hharley on August 03, 2010, 09:43:33 PM

I have read the other post on zooming in on table...Dont work for me ...I hold left mouse  and drag back  and it just turns the picture   Hold right and drag back   and does something elce . How do i zoom in ? if these fail?

Title: Re: Zoom
Post by: Tweakie.CNC on August 04, 2010, 01:48:43 AM

I use the scroll wheel on my mouse.

Tweakie.

Title: Re: Zoom
Post by: Hood on August 04, 2010, 02:34:02 AM

If you dont have a scroll wheel you hold the shift key and then press the left mouse button and move the mouse.
Hood

Title: Re: Zoom
Post by: hharley on August 04, 2010, 09:02:29 AM

Thank you very much :)

Title: Re: Zoom
Post by: propclock on March 24, 2014, 11:14:29 AM

Thank you very much, that has been bugging me. I don't have a scroll wheel on the
machine, but do on the development pc. You just saved me a bunch of leg work.

Again thanks, I looked on the web for that shortcut but only found it here.