Machsupport Forum
Mach Discussion => Mach3 under Vista => Topic started by: thosj on July 26, 2010, 08:46:39 AM
-
Is there a definitive answer of whether the Vista Reg fix is needed with Windows 7 and a SmoothStepper? I've looked around and found some discussion, but no definite answer.
-
IIRC the reg fix is needed only if you are running the pport.
If running an external motion controoler like the smooth stepper, DSPMC, or galil board you don't.
Mike
-
OK, cool. That's what I thought, but never found a real answer.
I installed on a new Win7 computer, did NOT install the reg fix, running SmoothStepper, all is well!! So I guess I confirmed it!
-
my win 7 computer crashes with the vista update, sherline and gecko 540